Shocq Inceptor Carbon Arrow "ready to shoot" with Feathers (4.2)
Configure article:
The Shocq Inceptor ready-to-shoot arrow with 3" feathers comes with already glued-in point and fixed lengths! Very affordable and attractive arrow with three different colors: green, yellow and white.
The feather color, as well as the color of the nock, is always the same for each spine, so that you can always buy the exact same arrow colors later. The arrow is supplied with a pin bushing and pin nock (small) already pre-installed.
We can't cut this arrow since the point is already glued in by the factory.
- Inner diameter 4.2mm
- 3" shield cut feathers
- Straightness +/- 0.006”
- Point glued in
Please order only in multiples of 3, ie 3, 6, 9 pieces etc, otherwise you will get an error message "invalid quantity" in the shopping cart! Note: the illustrations are stock photos only. We have no influence on the color of the nocks or fletching.
We can't cut this arrow as it comes "ready to shoot" with already glued-in point. |
Spine | GPI | length | outer diameter | point weight |
---|---|---|---|---|
0.500 | 7,90 | 32" | 5,85 mm | 100-80gn |
0.600 | 7,10 | 32" | 5,72 mm | 100-80gn |
0.700 | 6,50 | 32" | 5,57 mm | 100-80gn |
0.800 | 5,80 | 32" | 5,58 mm | 100-80gn |
0.900 | 5,50 | 30" | 5,42 mm | 80-60gn |
1.000 | 4,90 | 30" | 5,30 mm | 80-60gn |
1.100 | 4,77 | 28" | 5,28 mm | 70-50gn |
1.200 | 4,60 | 28" | 5,25 mm | 70-50gn |
1.300 | 4,25 | 28" | 5,16 mm | 70-50gn |
1.400 | 4,10 | 28" | 5,14 mm | 70-50gn |
1.500 | 3,82 | 28" | 5,09 mm | 70-50gn |
We try to keep the best price - click on the "best price" graphic on the right if you have seen this item cheaper elsewhere.
Qty Discounts New Price | ||
3-11 4,95 € |
12-23 4,45 € |
24+ 3,95 € |
* Discounts may vary based on options above |
- Manufacturer Info Shocq
- Contact information in accordance with Art. 19 EU GPSR
- Post Address:
- JVD Group B.V.
- Looier 9
- 5253 RA Nieuwkuijk
- Niederlande
- Electronical Address:
- Website: https://jvd-archery.com/contact